Filter
Top Products
36
Searching a for Disc (Only for the CD player)
Search for a disc by its performer:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press % / fi to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen
appears .
3. Press % / fi to move
to “PERFORMER”,
then press SET.
The PERFORMER SEARCH
screen appears.
4. Press % / fi / @ / # to move in front of the
first character of the performer you want to
search, then press SET.
To correct the incorrect entry, press % / fi / @ / # to move
in front of the correct character, then press SET.
Note:
Symbols such as @, # or $ cannot be available for search.
5. Press SET again.
Disc search starts, then the
SEARCH RESULT screen,
showing the performers,
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press % /
fi to move
to a searched disc, then press @ / #. Each time
you press @ / #, the disc information alternates between its
performer and its disc title.
• Starting a disc play and going to the Disc Information
screen (see page 35): Press % / fi to move
to a searched
disc, then press SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appear.
• Going back to the PERFORMER SEARCH screen: Press
EXIT.
Search for a disc by its disc title:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press % / fi to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen
appears.
3. Press % / fi to move
to “DISC TITLE,”
then press SET.
The DISC TITLE SEARCH
screen appears.
4. Press % / fi / @ / # to move in front of the
first character of the disc title you want to search,
then press SET.
To correct the incorrect entry, press % / fi / @ / # to move
in front of the correct character, then press SET.
Note:
Symbols such as @, # or $ cannot be available for search.
5. Press SET again.
Disc search starts, then the
SEARCH RESULT screen,
showing the disc titles,
appears.
6. On the SEARCH RESULT screen, you can do the
following:
• Changing the indication of the disc information: Press % /
fi to move
to a searched disc, then press @ / #. Each time
you press @ / #, the disc information alternates between its
disc title and its performer.
• Starting a disc play and going to the Disc Information
screen (see page 35): Press % / fi to move
to a searched
disc, then press SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appear.
• Going back to the DISC TITLE SEARCH screen: Press
EXIT.
EN28-38.RX-778V[J]/1 99.3.8, 6:02 PM36