JVC RX-778VBK Stereo System User Manual


 
31
SETTING 2
LFE ATT. : 0
dB
COMP. : OFF
DIGITAL 1 : DVD
DIGITAL 2 : CD
FL DISP. : NORMAL
PREVIOUS PAGE
:ENTER
Setting the Basic Setting Items (Also see
pages 12 – 15)
1. Press MENU.
The MAIN MENU appears on the TV.
Pressing one of the % / / @ / # buttons also displays the
MAIN MENU.
2. Press % / to move
to “SETTING,” then
press @ / #.
The SETTING 1 or SETTING
2 menu appears.
3. Press % / to move
to the item you want to
set or adjust, then press
@ / #.
To go to the SETTING 2
menu, move
to “NEXT
PAGE,” then press @ / #.
To go back to the SETTING
1 menu, move
to
“PREVIOUS PAGE,” then
press @ / #.
On the SETTING 1 and 2 menus, you can do the following:
“SUBWOOFER”: Set the subwoofer information
(see page 12).
“FRONT SPK”: Set the front speaker information
(see page 14).
“CENTER SPK”: Set the center speaker information
(see page 14).
“REAR SPK”: Set the rear speaker information
(see page 14).
“CNTR DELAY”: Adjust the delay time of the center
speaker output (see page 14). *
“REAR DELAY”: Adjust the delay time of the rear
speaker output (see page 14). **
“CROSSOVER”: Set the crossover frequency
(see page 15).
“LFE ATT.”: Set the low frequency effect attenuator
level (see page 15).
“COMP.”: Set the dynamic range compression
(see page 15).
“DIGITAL 1/2”: Set the digital input terminal
(see page 13).
“FL DISP.”: Set whether or not to show the disc
text information on the display
(see page 13).
Notes:
*
Not adjustable when “CENTER SPK” is set to “NONE”
(see page 14).
**
Not adjustable when “REAR SPK” is set to “NONE”
(see page 14).
4. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
Operating the Tuner (Also see pages 17 and 18)
1. Press MENU.
The MAIN MENU appears on the TV.
Pressing one of the % / / @ / # buttons also displays the
MAIN MENU.
2. Press % / to move
to “TUNER
CONTROL,” then
press @ / #.
The TUNER CONTROL menu
appears.
3. Press % / to move to the item you want to
set or adjust, then press @ / #.
On the TUNER CONTROL menu, you can do the following:
“PRESET CH”: Select a preset channel station.
“BAND”: Select the band.
“FREQUENCY”: Tune in a station manually.
“FM MODE”: Select the FM reception mode.*
“PRESET MEMORY”: See “Storing the Preset Stations” on
the next page.
Note:
*
Not displayed when an AM station is selected.
4. When you finish, press EXIT repeatedly until the
menu disappears from the TV.
SETTING 1
SUBWOOFER : NO
FRONT SPK : LARGE
CENTER SPK : SMALL
REAR SPK : LARGE
CNTR DELAY : 3msec
REAR DELAY : 5msec
CROSSOVER :100
Hz
NEXT PAGE
:ENTER
TUNER CONTROL
PRESET CH : 1
BAND :FM
FREQUENCY : 87.5
MHz
FM MODE :AUTO
PRESET MEMORY
:OPERATE
EN28-38.RX-778V[J]/1 99.3.8, 6:01 PM31