Filter
Top Products
9
CH–
100 1k 10k
MUTE AUTO
VOLUME
THEATER
LIVE CLUB ACTION
DANCE CLUB
HALL
PAVILION
FR
EON
LS
L
LEE
S
C
D S P
3D-PHONC
LOUDNESS
SLEEPATT
RS
R
S E A
TA
NEWS
INFO
Basic Operations
The following operations are commonly used when you play any sound source.
IMPORTANT:
When using the remote control, check to see if its
remote control mode selector is set to the correct
position:
To operate an audio system, TV, and VCR, set it
to “AUDIO/TV/VCR.”
To operate a CATV converter and DBS tuner,
set it to “CATV/DBS.”
Turning the Power On and Off (Standby)
On the front panel:
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
To turn off the power (into standby mode),
press POWER again.
The STANDBY lamp lights up. A small amount
of power is consumed in standby mode. To turn
the power off completely, unplug the AC power
cord.
From the remote control:
To turn on the power, press AUDIO
POWER ON.
The STANDBY lamp goes off. The name of
the current source (or station frequency)
appears on the display.
To turn off the power (into standby mode),
press AUDIO POWER STANDBY.
The STANDBY lamp lights up.
Selecting the Source to Play
On the front panel:
Turn SOURCE SELECTOR until the source
name you want appears on the display.
• As you turn the selector, the source changes as
follows:
CD O PHONO O TAPE (or MD) O FM O
AM O DVD O TV SOUND (or DBS) O
VCR O (back to the beginning)
The selected source lamp also lights up.
From the remote control:
Press one of the source selecting buttons.
Selected source name appears
DVD Select the DVD player.
CD * Select the CD player.
TAPE/MD * Select the cassette deck (or the MD recorder).
TV/DBS • Select TV sounds when the remote control mode
selector is set to “AUDIO/TV/VCR.”
• Select the DBS tuner when the remote control
mode selector is set to “CATV/DBS.”
PHONO * Select the turntable.
FM/AM * Select an FM or AM broadcast.
• Each time you press the button, the band alternates
between FM and AM.
VCR Select the video component connected to the VCR
jacks.
Notes:
• When connecting an MD recorder (to the TAPE/MD jacks), and a
DBS tuner (to the TV SOUND/DBS jacks), change the source name
shown on the display. For details, see page 12.
• When you press one of the source selecting buttons on the remote
control marked above with an asterisk (
*
), the receiver
automatically turns on.
AUDIO/
TV/VCR
CATV/DBS
POWER
STANDBY
100 1k 10k
VOLUME
Current source name appears
Current volume level is shown here
POWER
STANDBY
STANDBY ON
STANDBY ON
SOURCE SELECTOR
DVD
TV SOUND/DBS PHONO
TAPE/MDVCR
FM
AM
CD
DVD CD TAPE/MD
TV/DBS PHONO FM/AM
VCR
EN09-18.RX-778V[J]/1 99.3.8, 1:11 PM9