Filter
Top Products
27
Activating the DSP Modes
You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.
For Dolby Pro Logic and Dolby Digital Surround
On the front panel:
1. Press DOLBY SURROUND so
that the lamp on the button lights
up.
• Each time you press the button, the Dolby
Surround turns on and off alternately.
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with
DOLBY SURROUND
mark.
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with
DIGITAL
mark.
To cancel the Dolby Surround mode
Press DOLBY SURROUND again so that the
lamp on the button goes off. (“SURROUND
OFF” appears on the display.)
From the remote control:
1. Press SURROUND ON/OFF so
that the lamp on the DOLBY
SURROUND button on the front
panel lights up.
• Each time you press the button, the Dolby
Surround turns on and off alternately.
• You can also turn on Dolby Surround by
pressing SURROUND MODE. (See page
22 for more details.)
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with
DOLBY SURROUND
mark.
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with
DIGITAL
mark.
To cancel the Dolby Surround mode
Press SURROUND ON/OFF again.
(“SURROUND OFF” appears on the display.)
DOLBY SURROUND
SURROUND
ON/OFF
SURROUND
ON/OFF
DOLBY SURROUND
For the other DSP modes
On the front panel:
1. Press DSP MODE repeatedly until
the mode you want appears on the
display.
• Each time you press the button, the DSP
modes change. (See page 22 for more
details.)
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software:
– encoded with Dolby Surround and labeled with
DOLBY SURROUND
mark.
– encoded with Dolby Digital and labeled with
DIGITAL
mark.
To cancel the DSP mode
Press DSP MODE repeatedly until “DSP OFF”
appears on the display.
From the remote control:
1. Press SURROUND MODE
repeatedly until the DSP mode you
want appears on the display.
• Each time you press the button, the DSP
modes change. You can also turn on Dolby
Surround. (See page 22 for more details.)
2. Select and play a sound source.
• To enjoy 3D-PHONIC and JVC Theater Surround, play back a
software:
– encoded with Dolby Surround and labeled with
DOLBY SURROUND
mark.
– encoded with Dolby Digital and labeled with
DIGITAL
mark.
To cancel the DSP mode
Press SURROUND MODE repeatedly until
“DSP OFF” appears on the display.
DSP MODE
SURROUND
MODE
DSP MODE
SURROUND
MODE
EN19Å[27.RX-778V[J]/1 99.3.2, 3:15 PM27