JVC CA-NXCDR7R Stereo System User Manual


 
– 3 –
Precautions on Disc Playback and Recording
Playback
This unit has been designed to play back discs bearing the
following logos:
In addition to the above discs, this unit can play back audio
data recorded on CD-G (CD Graphics) and CD-Extra.
Notes on playing a CD-R or CD-RW:
The built-in CD Recorder can play back both finalized
and unfinalized CD-Rs/CD-RWs.
The built-in 3-CD Changer can also play back both
finalized and unfinalized CD-Rs/CD-RWs. However,
some unfinalized discs cannot be played back because
of their disc characteristics.
Either on 3-CD Changer or on CD Recorder, you can
play back CD-Rs or CD-RWs recorded on a personal
computer only if they have been recorded in the CD
audio format.
Neither on 3-CD Changer nor on CD Recorder, you can
play back MP3 discs.
Some CD-Rs and CD-RWs may not be played back
either on 3-CD Changer or on CD Recorder because of
their disc characteristics, damage or stains.
Important notice:
Continuous use of irregular–shaped discs (heart-shape,
octagonal, etc.) can damage the disc rotating mechanism.
CD-RWs may require a longer readout time. This is
caused by the fact that the reflectance of CD-RWs is
lower than for regular CDs.
Audio CD
CD Recordable (CD-R)
CD ReWritable (CD-RW)
CD Text
(Text information can be shown only when
playing on 3-CD Changer.)
Recording
This unit has been designed to record on the discs bearing
the following logos:
In addition to the logos shown above, the words shown
below or their equivalent should also be indicated
somewhere on the package or accompanying
documentation.
FOR CONSUMER
FOR CONSUMER USE
FOR MUSIC USE ONLY
The following discs cannot be used for recording:
Discs bearing logos other than the above.
Discs intended for professional use.
Discs intended for recording computer data.
Important notice:
The manufacturer assumes no liability whatsoever for
any damage resulting from missed opportunity or
accidental erasure that occurs while conducting
recording or playback operations due to malfunctioning
of or trouble in the unit, or for any incidental damage.
Before recording on a CD-R, it is recommended to make
a test recording using a CD-RW.
If PCA (Power Calibration Area) or PMA (Program
Memory Area) of the disc is recorded fully, recording
cannot be performed on this disc even though there are
still unused memory spaces on the disc.
DO NOT subject the unit to any shock or
vibration while recording.
DO NOT use a dusty or scratched CD-R/CD-
RW for recording; otherwise, you cannot
obtain the satisfactory recording quality.
CD Recordable (CD-R)
CD ReWritable (CD-RW)
It should be noted that it may be unlawful to re-
record pre-recorded tapes, records, or discs without
the consent of the owner of copyright in the sound or
video recording, broadcast or cable programme and
in any literary, dramatic, musical, or artistic
embodied therein.
EN01-12_CA-NXCDR7R[B]_f 01.7.23, 9:58 AM3