Filter
Top Products
– 36 –
Recording from 3-CD Changer
—CD Synchronized Recording
You have three methods to record from 3-CD Changer to
CD Recorder.
Using these synchronized recording methods, you can start
and playback and recording at the same time.
• CD Direct Recording—Records a disc in 3-CD
Changer (or the program you have made)—with or
without finalization (see page 33).
• First Track Recording—Records the first track of each
disc in 3-CD Changer.
• Listening Edit Recording—Records only tracks you
select while playing back discs in 3-CD Changer—with
or without finalization (see page 33).
Before starting any of the above recording, adjust the
recording input level if necessary.
See “To adjust the recording input level” on page 35.
CD Direct Recording
CD Direct Recording allows you to easily record a disc in
3-CD Changer onto a CD-R or CD-RW in CD Recorder.
■ Using the DIRECT REC button
On the unit ONLY:
1
Prepare discs in 3-CD Changer.
• If the current playing source is not 3-CD changer,
press CD 3 / 8, then 7. To select a disc, press DISC
repeatedly, then 7.
You can also use the remote control. When using it,
press CD1, CD2, or CD3, then 7.
You can make a program (see page 25) if you
want. (But you cannot select Random Play.)
2
Insert a recordable CD-R or CD-RW on the CDR
disc tray.
3
Press REC SPEED (inside the sliding panel) if
necessary.
• Each time you press the button, recording speed
alternates between normal speed and high speed*.
* For CD-R, 4 times normal speed; for CD-RW, 2 times
normal speed.
When high speed is selected, recording input level is reset
to “0” temporarily, and will not affect the recording.
CD
-
RW
UNFINALIZE DISC
AUTO TRACK
HIGH SPEED
d
B
REC LEVEL
CD
-
RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
d
B
REC LEVEL
Remaining time of the
currently playing track
Remaining time in the
CD-R/CD-RW
4
Press DIRECT REC.
• If OPC (see page 32) is being performed, “UPDATE
OPC” flashes first in the main display, then recording
starts.
Recording stops when a selected disc (or a program) is
recorded.
• Both 3-CD Changer and CD Recorder stop
automatically.
To confirm the recording contents, see “To change the
display information while recording” on page 35.
To stop recording, press 7. “STOP DUBBING” flashes
for a while.
• Both 3-CD Changer and CD Recorder stop
automatically.
To remove the recorded disc, press 0 CDR.
“FINALIZE ?” flashes in the main display for a while.
• If you do finalize the disc, press FINALIZE.
Remember once you finalize a CD-R, no further
recording can be made on the disc. (For more details, see
“Finalizing a Disc—CD-R/CD-RW” on page 41.)
• If you do not finalize the disc, press 0 CDR again.
If “SHORT REM. OK ?” appears when you press
DIRECT REC
There is not enough remaining time left on the recordable disc.
Eject and change a disc or press DIRECT REC one more time to
start recording anyway (the entire source disc cannot be recorded
in this case).
If you press DIRECT REC while listening to any
other source than 3-CD Changer (and CD Recorder)
Recording will also start if a recordable disc is on the CDR disc
tray. However, recording will not stop until you press 7.
During CD Direct Recording
Repeat Play will be canceled automatically.
321
CD
CD
-
RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
d
B
REC LEVEL
REC
321
CD
CD
-
RW
UNFINALIZE DISC
NORMAL
AUTO TRACK
SPEED
REC LEVEL
DIGITAL
REC
Continued
EN31-41_CA-NXCDR7R[B]_f 01.7.27, 6:27 PM36