JVC CA-NXCDR7R Stereo System User Manual


 
– 45 –
CD RW
UNFINALIZE DISC
SKIP
ON
321
REC
CD
-
RW
UNFINALIZE DISC
321
REC
CD RW
UNFINALIZE DISC
d
B
REC LEVEL
FINALIZE DISC
321
CD
-
RW
UNFINALIZE DISC
d
B
REC LEVEL
FINALIZE DISC
321
Erasing Tracks (Only for CD-RW)
Before finalizing a disc, you can erase recorded tracks—
from a selected track up to the last track—on a CD-RW at
a time.
To erase recorded tracks on a finalized CD-RW,
unfinalize the disc first (see page 46).
IMPORTANT
Once erasure is performed, erased data cannot be restored.
If you unplug the power cord or if a power failure occurs
while “ERASE TRACK” is flashing in the main display (in
step 4), the disc may not be utilized any more.
On the remote control ONLY:
1
Press MENU repeatedly until “TRACK ERASE”
appears in the main display.
Each time you press the button, the following menu
items appear as follows:
2
Press SET.
The following indication appears in the main display.
Erasure start track number, when it appears, is the
same as the last track number. (In the above example,
18 tracks are recorded on the CD-RW.)
3
Press ¢ or 4 to select the erasure start track.
You can also use the number buttons to select the
track. (See “To go to another track directly using the
number buttons” on page 30.)
4
Press ENTER.
While erasure is performed, “ERASE TRACK” flashes
in the main display. (The REC indicator also lights on
the display.)
Erasure start track
The last track
Ex.: When you erase the 12th track up to the last
Recording Skip Marks onto a CD-R/CD-RW
Before finalizing a disc, you can record a skip mark to an
unwanted track so that it will be skipped (ignored as if it
does not exist) during play.
IMPORTANT
Once skip marks are recorded, they cannot be erased (you
can only erase skip marks by erasing the tracks with skip
marks).
If you unplug the power cord or if a power failure occurs
while “WRITE SKIP” is flashing in the main display (in
step 3), the disc may not be utilized any more.
On the remote control ONLY:
1
Press MENU repeatedly until “TRACK SKIP”
appears in the main display.
Each time you press the button, the following menu
items appear as follows:
2
Press SET.
The following indication appears in the main display.
3
Press ¢ or 4 to select a track you want to skip
(during play) then press ENTER.
The SKIP ON indicator lights on the display.
4
Repeat steps 1 to 3 until you record skip marks to
all unwanted tracks.
You can record up to 21 skip marks on a disc.
More about skip marks
“Skipping tracks during play” does not mean erasing recorded
data. Therefore the remaining time of the disc will not change.
Tracks with skip marks will be skipped only when playing the
disc on CD Recorder and other CD player which can read these
skip marks.
CD RW
UNFINALIZE DISC
d
B
REC LEVEL
FINALIZE DISC
321
TRACK ERASE =
DISC ERASE
=
UNFINALIZE
=
TRACK SKIP
=
AUTO TRACK
=
TRACK SPACE
=
CONVERTER
=
Canceled
=
(back to the beginning)
TRACK ERASE = DISC ERASE = UNFINALIZE =
TRACK SKIP
= AUTO TRACK = TRACK SPACE =
CONVERTER
= Canceled = (back to the beginning)
Track number flashes
EN42-46_CA-NXCDR7R[B]_f 01.7.23, 10:01 AM45