Filter
Top Products
46
To change the transmittable signals for operating a CATV
converter or satellite tuner
1. Press and hold CATV/SAT (in the POWER section).
2. Press CATV CONTROL.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
4. Release CATV/SAT (in the POWER section).
Following button can be used for operating the CATV
converter or the satellite tuner:
CATV/SAT (in the POWER Turns on and off the CATV
section) converter or satellite tuner.
After pressing CATV CONTROL, you can perform the
following operations on the equipment:
CH +/– Changes the channels.
1 – 9, 0, 100+ (+10) Selects the channel.
100+ (+10) button will function as
the ENTER button if your
equipment requires pressing ENTER
after selecting a channel number.
RETURN Alternates between previously
selected channel and the current channel.
5. Try to operate your CATV converter or satellite
tuner by pressing CATV/SAT (in the POWER
section).
When your CATV converter or satellite tuner turns on or off, you have entered the
correct code.
If there are more than one code listed for your brand of CATV converter or
satellite tuner, try each one until the correct one is entered.
Note:
Refer to the manual supplied with
your CATV converter or satellite
tuner.
Manufacturer Codes
GI JERROLD 01, 02, 03, 04, 05,
06, 07, 08
HAMLIN/REGAL 15, 16, 17, 18
PIONEER 13, 14
SCIENTIFIC ATRANTA 09, 10
ZENITH 11, 12
RCA 19
SONY 20
Manufacturers’ codes are
subject to change without
notice. If they are changed,
this remote control cannot
operate the equipment.
CATV/SAT
ONE TOUCH
OPERATION
TV/VIDEO
TV
CATV
CONTROL
CD-DISC
SOUND
CONTROL
VCR AUDIO
CENTER
REAR
(L)
CH
TV
VOLUME
100+
RETURN/ENTER
3
2
1
65
4
98
0
7/P
+10
10
PHONO
CD
VCR
MUTING
VOLUME
DVD MULTI
TAPE
DVD
POWER
TUNER/
BAND
TV
SOUND
RM-SR664U
REMOTE CONTROL
DAP MODE 3D-PHONIC SURROUND
EFFECT DELAY TEST
SEA MODE SEA PRESET MENU
– REAR•R +
SLEEP
RX-664VBK(J)_0119-001B_En.24-50 98.1.6, 11:30 AM46