Filter
Top Products
45
Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control signals for other
manufacturers’ VCRs, TVs, CATV converters and satellite tuners. By changing the
transmittable signals from preset ones to the other manufacturers’, you can operate the
other manufacturer’s components using this remote control.
When operating the other manufacturers’ components, refer also to the manuals
supplied with them. To operate these components with the remote control, first you need
to set the manufacturer’s code each for VCR, TV, CATV converters, and satellite tuner.
To change the transmittable signals for operating another
manufacturer’s TV
1. Press and hold TV (in the POWER section).
2. Press TV SOUND.
3. Enter manufacturer’s code (two digits) using buttons
1–9, and 0.
See the list below to find the code.
4. Release TV in the POWER section.
The following buttons can be used for operating the TV:
TV Turns on and off the TV.
(in the POWER section)
TV VOLUME +/– Adjusts the volume.
TV/VIDEO Sets the input mode (either TV
or VIDEO).
After pressing TV SOUND, you can perform the
following operations on the TV:
CH +/– Changes the channels.
1 – 9, 0, 100+ (+10) Selects the TV channels.
100+ (+10) button will function as
the ENTER button if your
TV requires pressing ENTER
after selecting a channel number.
RETURN Alternates between the previously
selected channel and the current channel.
5. Try to operate your TV by pressing TV in the POWER section.
When your TV turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of TV, try each one until
the correct one is entered.
Note:
Refer to the manual supplied with
your TV.
Manufacturer Code Manufacturer Code
HITACHI 10 SAMSUNG 12
JVC 01 SANYO 13
MAGNAVOX 02 SHARP 06
MITSUBISHI 03 SONY 07
PANASONIC 04, 11 TOSHIBA 08
RCA 05 ZENITH 09
CATV/SAT
ONE TOUCH
OPERATION
TV/VIDEO
TV
CATV
CONTROL
CD-DISC
SOUND
CONTROL
VCR AUDIO
CENTER
REAR
(L)
CH
TV
VOLUME
100+
RETURN/ENTER
3
2
1
65
4
98
0
7/P
+10
10
PHONO
CD
VCR
MUTING
VOLUME
DVD MULTI
TAPE
DVD
POWER
TUNER/
BAND
TV
SOUND
RM-SR664U
REMOTE CONTROL
DAP MODE 3D-PHONIC SURROUND
EFFECT DELAY TEST
SEA MODE SEA PRESET MENU
– REAR•R +
SLEEP
Manufacturers’ codes are
subject to change without
notice. If they are changed,
this remote control cannot
operate the equipment.
RX-664VBK(J)_0119-001B_En.24-50 98.1.6, 11:30 AM45