Filter
Top Products
900 MHz RTK—GS2 Display
DK01672,000020A -19-01DEC11-2/3
DK01672,000020A -19-01DEC11-3/3
(M) Average signal level — Level of received signal that
this radio is seeing from the other radio transmitting to it.
This value should be at least a value of 15 higher than
the noise. If it is not, the link between the two radios is
probably not stable and reliable.
(N) Overall receive rate —Percentage of data that was
successfully transmitted from master to slave radio on
the rst attempt. Values higher than 75 indicate a good
radio link.
While the test is in progress the screen will read:
Radio Self Test in progress. . .
System is no longer in RTK mode.
Select END button to stop test.
PC12047 —UN—12MAY09
25-14
121511
PN=39