Filter
Top Products
900 MHz RTK—Base Station Setup
Continued onnext page JS56696,0000806 -19-15APR10-2/5
PC9554 —UN—10OCT07
GreenStar2 Pro - Guidance
A—View
B—Guidance Settings C—ShiftTrack Settings D—Signal Quality
The GS2 alerts the operator when the current StarFire
signal is not accurate. There are three levels of this
alarm system (Normal, Marginal, and Poor). The levels
are determined both by the StarFire Receiver's PDOP
value and the number of satellites being tracked. It is
recommend that if the StarFire receiver is being used
in high accuracy operations that care be taken when
the StarFire Signal Monitoring system indicates that
the current status is Marginal or Poor, as accuracy
degradation may occur.
NOTE: Operating in RTK or RTK-X, both PDOP and
“Number of Satellites” are used to determine
the level of alarm.
Operating at a signal level less than RTK (SF2,
SF1, WAAS, ect.) only PDOP will be used to
determine the level of alarm.
20-13
121511
PN=21