Filter
Top Products
42
Connecting
—Continued
Notes:
• Before connecting the power cord, complete all of the
necessary audio and video connections.
• Do not use a power cord other than the one supplied
with the RDV-1.1, which is designed exclusively for
use with the RDV-1.1 and should not be used with any
other component.
•Never disconnect the power cord from the RDV-1.1
while the other end is still plugged into a wall outlet.
Doing so may cause an electric shock. Always discon-
nect the power cord from the wall outlet first.
• The RDV-1.1 is shipped with the Power switch in the
On position ( ). When the power cord is connected
for the very first time, the RDV-1.1 will go on Standby
and the Standby indicator will light up.
•To completely shutdown the RDV-1.1, set the Power
switch to the Off position ( ).
Connecting the Power Cord
1
Plug the supplied power cord into the
RDV-1.1’s AC INLET.
2
Plug the other end of the power cord into
a suitable AC wall outlet.
The Standby indicator lights up.
The Standby indicator comes on only if the Power
switch is in the On position ( ).
M
ODEL NO.
DPC
-
7.4
DVD
CHANGER
AC
INLET