Filter
Top Products
28
Connecting
—Continued
The RDV-1.1 supports many digital audio formats. The following table shows which outputs work with each format.
Audio Formats & RDV-1.1 Outputs
Disc type Audio format
RDV-1.1 audio output
HDMI OUT
(digital)
a
a. The Digital Out/Digital 2 settings apply to the HDMI OUT (see page 76). Components must support HDCP (High-bandwidth Digital
Content Protection) in order to play DVD-Video. The RDV-1.1 does.
i.LINK
(digital)
b
b. The Digital Out/Digital 1 settings apply to the i.LINK sockets (see page 75). Components must support DTCP (Digital Transmission
Content Protection) in order to play DVD-Video, DVD-Audio, and SACD. The RDV-1.1 does.
DIGITAL 1 & 2
AUDIO OUT
(digital)
c
c. If the Digital Out setting is set to Off, nothing is output by these outputs (see page 76).
FRONT, SURR 1, CENTER,
SUBWOOFER, SURR 2
(analog)
d, j
d. 2-channel stereo sources are output only by the FRONT AUDIO OUT sockets. For multichannel sources, the Downmix Setting determines
how the FRONT AUDIO OUT sockets work (see page 77).
D.MIX
AUDIO OUT
(analog)
e
e. 2-channel sources, including Dolby Surround, are output as they are. Multichannel sources (5.1) are down mixed.
SCART
(analog)
f
f. European model only. 2-channel sources, including Dolby Surround, are output as they are. Multichannel sources can be down mixed to
stereo or Lt/Rt (see page 77).
DVD-Video
PCM
✓
g
g. To output PCM at sampling rates other than 44.1 kHz and 48 kHz, set the Linear PCM Out setting to Down Sample On (see page 76).
✓
h
h. Protected high sampling rate digital audio (96 kHz) will be down sampled to 48 kHz.
✓
i
i. You can choose whether or not to downsample 96 kHz audio to 48 kHz (see page 76).
✓
j
j. Set the Dolby Pro Logic setting to On to add surround sound (see page 77).
✓✓
Dolby Digital
✓
k
k. To use with an HDMI TV that does not support this format, set the appropriate Digital Out/Digital 2 setting (i.e., Dolby Digital Out, DTS
Out, or MPEG Out) to downmix to PCM (see page 76).
✓✓
✓
l
l. Set the Dolby Pro Logic setting to Auto or On to decode Dolby Surround material. Set it to On to add surround sound to 2-channel Dolby
Digital material (see page 77).
✓✓
DTS
✓
k
✓✓ ✓ ✓✓
MPEG
m
m. Only the 2-channel audio information is used.
✓
k
✓✓
✓
✓✓
DVD-Audio
n
n. High sampling rate DVD-Audio (192 kHz/176 kHz) will be down sampled to 96 kHz, 88.2 kHz, 48 kHz, or 44.1 kHz depending on the
disc.
PCM
✗✓
✓
o, i
o. Some DVD-Audio discs may not allow PCM output from the DIGITAL 1/2 AUDIO OUTs.
✓✓✓
Dolby Digital
✗✓
✓
p
p. Multichannel DVD-Audio will be down mixed to stereo.
✓✓✓
DTS
✗✓
✓
p
✓✓✓
MPEG
✗✓
✓
p
✓✓✓
SACD
q
q. By default the RDV-1.1 plays the multichannel area, although you can change this (see page 81).
Stereo area
✗
✓
r
r. When the i.LINK Output Setting is set to On, SACD audio is output from the i.LINK sockets, but not the analog audio outputs. When it’s
set to Off, SACD audio is output from the analog audio outputs, but not the i.LINK sockets (see page 77).
✗✓✓✓
Multichannel
area
✗
✓
r
✗✓✓✓
Hybrid disc CD
layer
✓✓ ✓ ✓ ✓ ✓
VCD
MPEG1
✓✓ ✓
✓
✓✓
CD
PCM
✓✓
✓
i
✓
j
✓✓
DTS
✓
k
✓✓ ✓ ✓✓
MP3
MP3
✓✓ ✓ ✓ ✓ ✓