Filter
Top Products
31
Connecting
—Continued
Notes:
• Before making any connections, turn off the RDV-1.1
and your TV and disconnect their power cords from
the wall outlets.
• Also refer to the hookup pages in your TV’s manual.
• Connect the RDV-1.1’s video outputs directly to your
TV. Don’t connect a VCR or other video equipment in
between. Doing so may result in picture distortion,
because of the copy protection system used on
DVD-Video discs.
• See the tables on page 27 for details on how the
RDV-1.1 outputs video and audio from each output.
This section shows how to connect the RDV-1.1 to an
HDTV (plasma, LCD) or projector.
Use a commercially available component video cable
(BNC) to connect the RDV-1.1’s HD VIDEO OUT
COMPONENT 1 or 2 sockets to a component video
input on your HDTV. Use the supplied AV cable (RCA)
to connect the RDV-1.1’s D.MIX AUDIO OUT to an
analog audio input on your HDTV.
Notes:
• The yellow plugs on the supplied AV RCA cable are
not used in this example.
• Don’t connect a standard TV to the HD VIDEO OUT
COMPONENT 1 or 2 socket, because you’ll get no
picture.
• See the tables on page 27 for details on how the
RDV-1.1 outputs video and audio from each output.
1
Turn off the RDV-1.1 and your TV, and dis-
connect their power cords from the wall
outlets.
2
Connect the RDV-1.1 to your TV as shown.
3
When you’ve completed all connections,
see “Turning On the RDV-1.1” on page 43.
D. Connecting an HDTV or Projector
COAXIAL OPTICAL OPTICALCOAXIAL
DIGITAL
1
DIGITAL
2
DIGITAL 2
(
BALANCED
)
AES/EBU
AUDIO
OUT
D. MIX FRONT SURR
1
CENTER SURR
2
L
R
L
R
IN
SUB
WOOFER
1
2
YPB PR
OUT
OUT
IN
REMOTE
CONTROL
VIDEO
OUT
COMPONENT
VIDEO
S
VIDEO VIDEO
S
VIDEO
Y
P
B
PR
Y
P
B
PR
IN
1
+
21
RS
232
HDMI
VIDEO
IN
IR
S400
(
AUDIO
)
AUDIO
OUT
HD VIDEO
OUT
COMPONENT
12
V
TRIGGER
SURR
MODE
(
AUDIO OUT
)
YPB PR
Y
1
PB PR
COMPONENT
COMPONENT IN
D. MIX
L
R
AUDIO
OUT
LR
ANALOG INPUT
HDTV, projector
Component
video cable
(white)
(red)
Signal flow
(white)
(red)
AV RCA cable
(supplied)