Filter
Top Products
5
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
Front, center, and surround speakers
Remote control
Setting up your home
theater system
Finding a location for your home theater
system
• Install your home theater system on a stable flat
surface. Position your receiver so that it has a
direct line of sight to the remote control.
• Do not expose your system to extremes of
temperature or humidity.
• Avoid placing your system on a hot surface such
as on top of other hot running equipment. Make
sure that there is adequate ventilation to your
system.
# Description Function
1 Keyhole slots Used to wall-mount the speakers.
2 Speaker terminals These push terminals are for connecting the
speaker to the receiver with the supplied
speaker cables.
3 Threaded Inserts These threaded inserts are for Init®-Home
Theater Speaker Mounts NT-SWM series.
Item Description Function
1 ON/STANDBY button Press to turn the power on to your receiver.
Press again to go to standby mode.
2 Remote mode input selector
buttons
Press to directly select your receiver input
source.
SC-51A
Front speakers
Rear speakers
Center speaker
3
ENTER ///
TUNING+/–
Press the arrow keys to navigate through the
on-screen menus. Press ENTER to confirm a
selection or setting.
In tuning mode, press to tune to the next
(TUNING+) or previous (TUNING–) station.
4 SETUP button Press to open the on-screen menus.
5 LISTENING MODE buttons Press to select the listening mode you want.
See “Using the listening modes” on page 16
for additional information.
6 D.TUN
DIMMER
In tuner mode, press D.TUN, then the
number buttons to tune directly to a
frequency.
Press DIMMER to adjust the brightness of
the display.
7 DISPLAY button Press repeatedly to cycle through the
available input source information.
8 RECEIVER button Press to control the receiver.
9 MUTING button Press to mute the sound output from the
receiver.
10 TUNE MODE button Press to toggle between auto and manual
tuning modes.
11
VOL / buttons
Press to increase or decrease the sound
volume.
12 CH +/– buttons
ALBUM
In tuner mode, press to go to the next or
previous preset channel.
13 RETURN button In menu mode, press to return to the main
menu.
14 AUDIO button Press to access audio settings. See
“Changing audio settings” on page 24.
15 Number buttons Press to enter a preset number or to
manually tune the radio.
16 SLEEP/CLR button Press repeatedly to select the sleep timer
duration.
In menu mode, press to clear an entry.
Caution
Do not install the receiver in a confined space such as
a bookcase.
Caution
Connect the AC cord only after the speakers,
antenna, and all optional equipment have been
connected. Never make or change any
connections with the power turned on.
Item Description Function
NS-HTIB51A_10-0114_MAN_.book Page 5 Tuesday, April 13, 2010 10:19 AM