Filter
Top Products
25
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
•DTS
•DTS Neo:6 Cinema
•DTS 96/24
•DTS-HD High Resolution
•DTS-HD Master
•DTS Express.
Setting the Audio Selector
You can set priorities of audio output when there
are both digital and analog inputs. Options include:
• ARC–The audio signal from your TV tuner can
be sent digitally to the HDMI OUT of the
receiver. With this selection, the TV’s audio can
automatically be selected as a priority.
• HDMI–This can be selected when HDMI IN
has been assigned as an input source. If both
HDMI (HDMI IN) and digital audio inputs
(COAXIAL IN or OPTICAL IN) have been
assigned, HDMI input is automatically
selected.
• COAX–This can be selected when COAXIAL IN
has been assigned as an input source. If both
coaxial and optical inputs have been assigned,
coaxial input is automatically selected.
• OPT–This can be selected when OPTICAL IN
has been assigned as an input source.
• Analog–The receiver always outputs analog
signals.
Setting the A/V Sync
When using progressive scanning on your Blu-ray
Disc/DVD player, you may find that the picture and
sound are out of sync. With this setting, you can
correct this by delaying the audio signals. Option
settings are from 0 ms to 100 ms, in 10 ms steps.
Selecting a digital input signal format
The digital input signal formats are available only
for the input sources that you have assigned a
digital input jack.
Normally, the receiver detects the signal format
automatically. However, if you experience any
issues when playing PCM or DTS material, you can
manually set the signal format to PCM or DTS.
To select a digital input signal format:
1 Press RECEIVER, then press and hold AUDIO for
about eight seconds. Auto appears on the
display.
2 Press
or to select one of the following
options:
• Auto–The format is detected automatically. If
no digital input signal is present, the
corresponding analog input is used instead.
• PCM–Only 2-channel PCM format input
signals are heard. If the input signal is not
PCM, the PCM indicator flashes and noise may
also be produced.
• DTS–Only DTS (but not DTS-HD) format input
signals is heard. If the input signal is not DTS,
the DTS indicator flashes and there is no
sound.
Notes
The CinemaFILTER may not work with some input
sources.
Notes
• The setting is stored individually for each input
selector.
• This setting can be made only for the input
source that is assigned as HDMI IN, COAXIAL IN,
or OPTICAL IN. If both HDMI (HDMI IN) and
digital audio inputs (COAXIAL IN or OPTICAL IN)
are assigned, HDMI input is selected as a priority
by setting to ARC. To select the digital audio
input, see “Setting up Digital Audio (Digital
Audio menu)” on page 19.
•You can select ARC if you select the TV/CD input
selector. But you cannot select it if you have
selected Off in the Audio Return Ch setting.
Notes
• A/V Sync is disabled when the Direct listening
mode is used with an analog input source.
• The setting is stored individually for each input
selector.
Notes
• If the beginnings of tracks from a PCM source
are cut off, try setting the format to PCM.
• If noise is produced when fast forwarding or
reversing a DTS CD, try setting the format to
DTS.
• The setting is stored individually for each input
selector.
• The setting is reset to Auto when you change
the setting in the Audio Selector.
NS-HTIB51A_10-0114_MAN_.book Page 25 Tuesday, April 13, 2010 10:19 AM