Filter
Top Products
19
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
Using advanced setup
Using on-screen setup menus
On-screen setup menus appear on the connected
TV and provide a convenient way to change the
receiver’s various settings. Settings are organized
into nine categories on the main menu.
You can change the settings by using the on-screen
display.
To use the on-screen setup menus:
1 Press RECEIVER, then press SETUP. The Setup
menu opens.
2 Press or to select a menu, then press
ENTER.
3 Press or to select an option, then press
or to change the setting.
4 Press SETUP to close the menu.
5 Press RETURN to return to the main menu.
Setting up HDMI input (HDMI Input menu)
If you connect a video component to HDMI inputs,
you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD
player to HDMI IN 2, you must assign HDMI2 to the
BD/DVD input selector.
Here are the default assignments:
HDMI1, HDMI2, HDMI3–Select the HDMI input to
which the video component has been connected.
- - - - -–Select if you’re not using the HDMI OUT.
Each HDMI input can only be assigned to a single
input selector. When HDMI1 - HDMI3 have already
been assigned, you must first set unused input
selectors to “- - - - -,” or you cannot assign HDMI1 -
HDMI3 to an input selector.
Setting up Component input (Component
menu)
If you connect a video component to a component
video input, you must assign that input to an input
selector. For example, if you connect your Blu-ray
Disc/DVD player to COMPONENT VIDEO IN 2, you
must assign IN2 to the BD/DVD input selector.
Here are the default assignments:
IN1, IN2–Select the component input to which the
video component has been connected.
- - - - -–Select if you’re not using the COMPONENT
VIDEO OUT.
Setting up Digital Audio (Digital Audio menu)
If you connect a component to a digital audio input,
you must assign that input to an input selector. For
example, if you connect your CD player to the
OPTICAL IN 1, you must assign OPT1 to the TV/CD
input selector.
Here are the default assignments:
Tip
If the main menu doesn’t appear, make sure the
appropriate external input is selected on your TV.
Tip
You can also performed these changes on the
receiver by pressing SETUP, the arrow buttons, then
ENTER.
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR ------
CBL/SAT HDMI2
GAME HDMI3
AUX ------
TV/CD ------
PORT ------
Notes
• When an HDMI IN is assigned to an input
selector as explained here, the digital audio
input for that input selector is automatically set
to the same HDMI IN.
• If you connect a component to a UNIVERSAL
PORT jack, you cannot assign any input to the
PORT selector.
• Do not assign the component connected with
the HDMI input to a TV/CD selector when you
set the TV Control setting to On. Otherwise, the
appropriate CEC (Consumer Electronics Control)
operation can not be guaranteed.
Tip
If you connect an input component to the
UNIVERSAL PORT jack, you cannot assign any input
to the PORT selector.
Input selector Default assignment
BD/DVD IN1
VCR/DVR ------
CBL/SAT IN2
GAME ------
AUX ------
TV/CD ------
PORT ------
Input selector Default assignment
BD/DVD COAX
VCR/DVR ------
CBL/SAT ------
GAME OPT1
AUX ------
TV/CD OPT2
PORT ------
NS-HTIB51A_10-0114_MAN_.book Page 19 Tuesday, April 13, 2010 10:19 AM