Filter
Top Products
3
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
Receiver components
Receiver features
• 110 Watts/Channel @ 6 ohms
• Audyssey 2EQ to Correct Room Acoustic Problems
• Audyssey Dynamic EQ for Loudness Correction
• Audyssey Dynamic Volume to Maintain Optimal
Listening Level and Dynamic Range
• HDMI (Ver.1.4 with Audio Return Channel, 3D),
Deep-Color, x.v.Color, Lip Sync, DTS-HD Master
Audio, DTS-HD High Resolution Audio, Dolby
TrueHD, Dolby Digital Plus, DSD and Multi-CH
PCM
• 3 HDMI Inputs and 1 Output
• 3 Digital Inputs (2 Optical/1 Coaxial)
• Component Video Switching (2 Inputs/1 Output)
• Banana Plug-Compatible Speaker Posts
• 40 FM/AM Presets
• H.C.P.S. (High Current Power Supply) Massive High
Power Transformer
•Direct Mode
• 192 kHz/24-bit D/A Converters
• Powerful and Highly Accurate 32-bit Processing
DSP
• Crossover Adjustment
(40/50/60/80/100/120/150/200 Hz)
• A/V Sync Control Function (up to 100 ms)
•On-Screen Display via HDMI
* “x.v.Color” is a trademark of Sony Corporation.
Package contents
• Receiver
•2 Front speakers
•1 Center speaker
• 2 Surround speakers
•1 Subwoofer
•Remote control
• 2 x AA batteries
• FM antenna
• AM antenna
• Speaker setup microphone
• Color labels for speaker cables
•Speaker cables:
•11 ft. x 3
•26 ft. x 2
•RCA cable 10 ft. x 1
• 20 rubber spacers for speakers
Front controls
Item Description Function
1
|/ ON/STANDBY button
Press to turn on your stereo receiver.
2 HDMI THRU indicator Lights when the HDMI pass-through function is
activated in standby mode.
3 STANDBY indicator Lights red when your stereo receiver is in
standby mode.
4 Remote control sensor Receives the signal from the remote control.
5 Display See “Display” on page 4 for additional
information.
6 SETUP button Press to open the on-screen menus.
7
TUNING /
PRESET /
ENTER
Press TUNING / to tune the radio to the
next or previous station.
Press PRESET / to tune the radio to the
next or previous station preset.
Press ENTER to confirm a selection.
8 RETURN button In menu mode, press to return to the main
menu.
9 MEMORY button Press to save a radio station preset. Press with
the TUNING MODE button to clear presets.
10 TUNING MODE button Press to turn on the receiver tuning mode and
listen to the radio. Press with the MEMORY
button to clear presets.
11 MASTER VOLUME knob Turn to increase or decrease the volume.
12 Headphone jack Plug your headphones into this jack.
13 Input selector buttons Press to select the input signal source you want.
14 Protective cap Remove when using jack.
15 AUX INPUT VIDEO jack Plug an external video source into this jack.
16 AUX INPUT AUDIO L/R
jacks
Plug an external sound source into this jack.
17 SETUP MIC jack Plug the Audyssey setup microphone into this
jack. See “Using the Audyssey 2EQ® room
correction and speaker setup” on page 12.
18 AUDIO button Press to access audio settings. See “Changing
audio settings” on page 24.
NS-HTIB51A_10-0114_MAN_.book Page 3 Tuesday, April 13, 2010 10:19 AM