Filter
Top Products
5 - 2
¤
ENTERING ADJUSTMENT MODE
q
Turn the power OFF.
w
Connect the JIG cable (see page 5-1) to the [MIC/SP] jack.
e
Turn the "S1" of the JIG cable ON.
r
While pushing [FUNC], [BAND] and [
Y
] key, turn the
power ON.
t
Turn the "S1" of the JIG cable OFF, then start the adjust
ment.
During adjustment mode, the function dispaly shows the ad-
justment item, frequency, etc. as below.
&-
!DJUSTMENTITEM
!DJUSTMENTFREQUENCY
¤
QUITING ADJUSTMENT MODE
• Turn the power OFF.
¤
KEY ASSIGNMENTS FOR ADJUSTMENT MODE
• : Selects the next adjustment item.
• : Selects the previous adjustment item.
• [DIAL] : Adjusts the value for the item manually.
• + : Adjusts the value for the item automatically.
• : Stores the set value.
NOTE: The set value storing is inhibited
during transmit. Release PTT
switch to return to receive first,
then push this key to store the
set value.
3#!.
3-7