HP (Hewlett-Packard) N31.5 Stereo System User Manual


 
18
2DISPLAY INTENSITY
Pressing this button varies the brightness of the display. Four brightness lev-
els are available.
When the Nº31.5’s main power switch is first turned on (or when power is
restored after an interruption), the display is automatically set to its second-
brightest level.
Pressing display intensity once dims the display one level; pressing it again
dims it further; pressing it again turns the display off. Pressing display in-
tensity
once more returns the display to its brightest level.
display intensity also affects the Nº31.5’s front-panel LEDs. When the display
is turned off, however, the LEDs still glow dimly.
3 TOP-PANEL CONTROLS
See Top Panel.
4 DISPLAY
See Display.
5DISPLAY MODE
This button allows you to change the type of information shown in the
time portion of the display. (See Display.)
When a CD is loaded and ready for play, the time portion of the display
shows the time remaining on the CD; the time remaining and on disc LEDs
are lighted.
Press display mode to change the time part of the display:
time remaining on track
display
mode
time remaining on disc
elapsed time on disc
elapsed time on track
The information in the time portion of the display corresponds to the
lighted LEDs to the right of the display mode button. After play begins, the
display will reflect the last display mode you selected.
Along with program + (13) and program - (14), the display mode button
is also used to change the link settings. (See Setting Options.)
6REPEAT DISC
To repeat (continuously) all tracks on a CD (or all tracks in a program),
press this button. Note that this function and the repeat track function are
mutually exclusive.