Filter
Top Products
140 HP Digital Entertainment Center
Configuring audio for Media Center
To configure multichannel audio output for Media Center
audio:
1 Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2 Click Settings, General, Media Center Setup,
and then Setup your Speakers. The Speaker
Setup screen displays.
3 Click Next.
4 Under Specify how many speakers you have, select
the speaker number that matches your system. For
example, select 5.1. Click Next.
5 Select Test. If you hear tones from all your speakers,
click Next. If you do not hear tones from all your
speakers, follow the onscreen instructions.
6 Click Finish.
Configuring audio for the DVD player
To configure multichannel audio output for the Media
Center DVD playback:
1 Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2 Click Settings, DVD, Audio, and then
Configuration.
3 Set sound output to match your speaker system.
For example, select 5.1 for analog audio
connections. If you have a digital audio connection,
select S/PDIF.
4 Click Save.
n
Reduce the volume level before changing
channels. Exercise particular caution when
changing from ATSC to NTSC channels. Your
analog NTSC channel audio levels may be
noticeably higher than your SD/HDTV
channel audio levels. The channel sound
volume is controlled by the content provider.
n
If your speaker configuration is not
displayed, click the Sound Effect (speaker)
icon in the desktop system tray.