Harman-Kardon AVR80 Stereo Receiver User Manual


 
On Screen Display
26
ENGLISH
Input Selection
When the source input is changed, this
message will appear (Figure #7). The top
line is the audio input source, the bottom
line is the video input source. Remember,
when choosing an input, select the video
source first, and then the audio source if
a split input/simulcast listening session is
desired. Note that when the TAPE
COPY function is engaged, the
AUDIOsource is displayed in reverse
video.
Tape Copy Input Selection
When an input is selected for either
TAPE1or VCR1record source by the
front buttons Ò, the choices appear
as a message with the TAPE1 information
on the top line and the VCR1 information
on the bottom line. (Figure #8)
Surround Output Levels
To obtain a status screen with the outputs
for each individual channel, press the
SPEAKER button v on the remote. A
summary will appear for ten seconds.
(Figure #9)
Master Volume
When the volume is changed, a
horizontal scale will briefly appear at the
bottom of the screen with the volume
level. (Figure #10)
Mute
When the unit is placed in audio mute,
the word MUTEwill appear in the
upper right corner of the screen as a
reminder that the volume has been cut.
(Figure #11)
On Screen Display Function
If you do not wish to have the on screen
displays appear, press the SCREEN
DISPLAY button s on the remote
until OSDOFFappears on the display.
A reminder message will appear on the
screen for a few seconds (Figure #12),
and the displays will then be canceled
until they are once again activated.
NOTE: Additional display messages
appear as a part of the Multiroom system.
These are described in the portion of this
manual dealing with that topic.
Using The On Screen Menus
for System Control
Besides conveying status messages, the on
screen display system may also be used as
a means of controlling the operation of
the unit. To operate the control system,
always start by pressing SELECT r on
the remote to bring up the Main Menu.
(Figure #1). Then, use the up/down
navigational arrow keys and ¤ q
to move the cursor. Press SELECT r
to choose a menu, and then use the
left/right navigational arrow keys and
q to view the choices in that current
option. Finally, when the desired choice
appears, press SELECT r to enter the
choice and return to the MAIN MENU.
To exit from the Menu Control System,
press ¤ q until the on screen > cursor
is pointing to MENU OFFand press
SELECT r.
MASTER VOLUME
||
Figure 10
MUTE
Figure 11
ON SCREEN DISPLAY
OFF
Figure 12
>TAPE *TUNER*
VCR1 *LD*
RETURN TO MAIN MENU
REC OUT SELECTOR
Figure 14
>AUDIO *LD*
VIDEO *LD*
TAPE MONITOR ON
OFF
RETURN TO MAIN MENU
INPUT SELECTOR
Figure 13
AVR80 manual 11/01/98 13:01 Side 26