Grundig UMS 5800 DEC Stereo System User Manual


 
TIMER MODE
----------------------------------------------------------------------------------------
7 Press »INTRO/REP.
« to finish the settings.
– Display: »
§
« or »e«, the day of the week and the time.
– The hi-fi system switches on at the set time with the selected
signal source (maximum alarm duration 90 minutes).
Note:
The volume of the alarm increases continually from zero onwards
until an individually set maximum volume is reached. If you press
»
I
+
« on the hi-fi or »
X
+« on the remote control during
the alarm in CD, SD/MMC, USB or tuner mode, the volume stops
increasing.
Interrupting the alarm
1 During the alarm, press »SNOOZE« on the remote control.
– The alarm signal stops.
– The alarm goes off again at five-minute intervals (alarm
duration – 90 minutes).
Cancelling the alarm for the day
1 Switch the hi-fi system off by pressing »ON/OFF« when the
alarm is sounding.
– The switch-on timer remains activated for the next day.
Switching off the alarm for the weekend
You can switch off the alarm function over the weekend. The entered
alarm times are saved.
1 Switch off the alarm function with »WEC« on the remote control.
– Display: » «.
2 Press »WEC« on the remote control to reactivate the alarm func-
tion.
– Display: » « disappears.
Activating and deactivating the switch-on timer
1 To deactivate the switch-on timer, press »INTRO/REP. « briefly
in standby mode.
– Display: »
e
« or »
§
« disappear.
– The switch-on timer is deactivated, the set alarm time is stored.
2 To activate the switch-on timer, press »INTRO/REP. « briefly in
standby mode.
– Display: »
e
« or »
§
«.
WEC
WEC
34
11:34
THU
§
23:16
TUE
e
22:40
FRI
§
WEC