Filter
Top Products
CONNECTION AND PREPARATION
----
ENGLISH
15
Connecting an MP3 player or a USB memory stick
The hi-fi system supports most USB memory sticks or MP3 players.
Note:
The hi-fi system must be switched off while the USB connection is
being made. If it is not switched off, data can be lost.
1 Connect the USB interface of the MP3 player to the »USB« socket
on the hi-fi system (under the flap), using a standard USB cable
or
insert the USB plug of the USB memory stick in the »USB« inter-
face on the hi-fi system (under the flap).
Note:
To remove the MP3 player or the USB memory stick, switch off
the hi-fi system and pull out the cable for the data medium.
Inserting a memory card
The hi-fi system supports MMC and SD memory cards.
Note:
The hi-fi system must be switched off while the memory card is
being inserted. If it is not switched off, data can be lost.
1 Insert the card carefully into the »CARD« card slot (under the
flap) until it latches into place.
Note:
Do not use excessive force when inserting the memory card. Only
apply slight pressure.
The memory cards are resistant to dirt and moisture, but may only
be inserted into the hi-fi system in a dry and clean condition.
Never remove memory cards during operation. This can damage
the memory card. This type of damage will invalidate your
warranty.
Removing the memory card
1 Switch off the hi-fi system by pressing »ON/OFF«.
2 Remove the memory card from the card slot by pressing the card
inwards slightly until the latch is released. Then pull out the card.