Filter
Top Products
Your hi-fi system has three timer modes:
– The switch-on timer, which switches the hi-fi system on at the set
time and wakes you with an alarm or music.
– The reminder timer (NAP), reminding you by sounding the signal
tone at a preset time.
– The sleep timer, which switches the hi-fi system off at a preset time.
Switch-on timer
Setting the switch-on timer
The time must be set on the hi-fi system. Timer settings can only be
performed in standby mode.
When this setting is being made, if no button is pushed for more than
10 seconds, the hi-fi system will end the process automatically. You
then have to start again.
1 Keep pressing »INTRO/REP.
≈
« until the hours flash in the
display.
2 Set the hours for the switch-on time with »8« or »9« and press
»
INTRO/REP.
≈
« to confirm.
– Display: the minutes flash.
3 Set the minutes for the switch-on time with »8« or »9« and
press »
INTRO/REP.
≈
« to confirm.
– Display: »
CD«, »SD CARD«, »USB«, »TUNER« or »BUZZER«
flashes.
4 Select the signal source (CD, SD/MMC card, USB, radio station
or signal tone) with »
8« or »9«.
Note:
If you select CD, MMC/SD card or USB as the alarm input
source, make sure you have inserted the appropriate medium or
connected a USB device. Otherwise the device switches on with
the radio station last selected.
If you select tuner, press »
8« or »9« to select the preset.
5 Press »INTRO/REP.
≈
« to confirm the settings.
– Display: the alarm volume flashes.
6 Press »–
I
+
« on the hi-fi or »–
X
+« on the remote control
to set the maximum volume.
TIMER MODE
----------------------------------------------------------------------------------------
ENGLISH
33
12:00
CD
6:00
CD
6:30
CD
6:30
VOL 20
§