Filter
Top Products
SETTINGS
----------------------------------------------------------------------------------------------------
Setting and storing radio channels
Automatic station search (ASP)
The first time you switch on the device, the automatic station search
in tuner mode looks for the 40 stations with the best reception and
stores them.
– Display: »FM«, the frequency in rapid run-through and
»PROGRAM«.
– The search has started. After the search has finished, you will
hear the station stored at preset position 01.
Notes:
The automatic station search can be interrupted by briefly press-
ing »
■«.
The automatic station search can be repeated any time by press-
ing and holding down »
PROG./RAND. ¥« until the frequency
display switches to rapid run-through. The stations stored previ-
ously will be deleted.
Automatic station search
1 Press »M« to select the tuner input source.
– Display: »TUNER«, then the wave band and frequency or chan-
nel name.
2 Press »BAND« to select the frequency band (FM or MW).
– Display: »FM« or »MW«.
3 Activate the station search by pressing »8« or »9« until the
frequency display changes to rapid run-through.
– The search stops when a channel is found.
Manual station search
1 To move the frequency forward in steps, briefly press
»8« or »9« several times.
– The frequency changes in 50 kHz steps.
18
P 02
FM 97.55
PROGRAM
MHz
12:32
FM 87.50
MHz
12:45
FM 87.65
MHz
12:32
TUNER
)