Filter
Top Products
42
Tuner mode
Selecting the tuner input source
1 Select the input source by pressing »AM FM« on the remote
control or »FUNCTION« on the DVD receiver.
– The most recently selected radio station is played (Last Station
Memory).
– Display on the DVD receiver: frequency band and frequency,
or station name.
Selecting the waveband
1 Select the wavebands FM (VHF) or AM (medium wave) by
pressing »AM FM« on the remote control or »FUNCTION«
on the DVD receiver.
– Display on the DVD receiver: »FM« or »AM« and the frequen-
cy or briefly »TUNER FM« or »TUNER AM«.
Calling up stored radio stations
1 Select the preset position by pressing »1 ... 0« and »OK« on
the remote control.
– Display on the DVD receiver: briefly, e.g.
»FM06 100. 60 MHz«
or
Press »5« or »6« on the remote control to select preset posi-
tion one at a time.
– Display on the DVD receiver: briefly e.g. »STATION 08«,
then the frequency or station name.
Switching between stereo and mono reception
When the DVD receiver receives FM stereo stations, »STEREO«
appears in the display. If the signal from the FM stereo station is
weak, you can improve the sound quality by switching to mono
reception.
1 Press »FM MODE« on the remote control to switch to mono
reception.
– Display: briefly »MONO«, »STEREO« disappears.
2 To switch back to FM stereo, press »FM MODE« on the remote
control.
– Display: briefly »STEREO«, »STEREO« remains on.
RDS station service
RDS (Radio Data System) is an additional information system pro-
vided by most FM stations. When the DVD receiver is receiving an
RDS station, »RDS« and the station name appear in the display.
OTHER MODES
_____________________________________
FM 100.60 MHz
FM06 100.60 MHz
STATION 08
STEREO STEREO
AM 1404 KHz