ENGLISH
25
SETTINGS
______________________________________________
Tuning and storing radio stations ...
You can store up to 30 FM radio stations and 30 AM radio stations.
You can see the displays for this in the DVD receiver.
... using the automatic station search (ASP)
1 Switch on the DVD receiver from standby by pressing »9« on
the remote control or »ON/OFF« on the device.
– The DVD receiver switches on with the last input source selected.
2 Press »AM FM« on the remote control or »FUNCTION« on
the DVD receiver to select the TUNER input source.
– Display on the DVD receiver: e.g. »FM 87.50
MHz«.
3 To start the automatic station search, press »M« on the remote
control until »AUTO SAVE« appears in the display.
– The automatic station search begins. The receiver searches for
up to 30 stations with the strongest signals in the FM range
and another 30 in the AM range.
– After the search has finished, you will hear the station stored
at position 1.
Note:
You can stop the search by pressing »M« on the remote control
(display: »SAVE STOP«).
... manually
1 Press »AM FM« on the remote control or »FUNCTION« on
the DVD receiver to select the waveband (FM or AM).
2 To start the search, press »
m« or »,« until the frequency in
the search changes.
– The search stops when a radio station is found.
– Display: e.g. »FM 100.60 MHz«.
Note:
To change the frequency in steps, briefly press »
m« or »,«
several times.
– Display: the frequency in 50 kHz increments
or
Enter the frequency directly with »1 ... 0« and press »OK« to
confirm.
– Display: e.g. »FM
- - - -
8«, then e.g.
»FM
-
88.60«.
– The radio station is then played.
FM 100.60 MHz
FM
- - - -
8
FM 87.50 MHz
FM03 92.50 MHz