Filter
Top Products
ENGLISH
29
Selecting sound settings
You can choose between five different sound settings (LIVE HOUSE,
HALL, CONCERT, STADIUM, THEATRE and DSP OFF).
1 Press »DSP« to call up the current sound setting.
– Display on the DVD receiver: »LIVE HOUSE«, »HALL«,
»CONCERT«, »STADIUM«, »THEATRE« or »DSP OFF«.
2 Keep pressing »DSP« on the remote control to select the sound
setting you want.
Switching between two-channel and multi-channel
mode
The DVD receiver has a Dolby Pro Logic II Decoder, which converts
the stereo signal into a Dolby surround signal during disc playback,
thus providing a high quality surround sound effect.
Pro Logic II has two playback modes, namely music and movie.
In music mode, there is a shelf filter, which acts gently on high
frequencies on the surround channels. It provides a natural,
convincing sound effect, because surround sound information is
normally subject to slight treble attenuation due to reflection and
absorption. Movie mode, on the other hand, does not use a
surround filter, but stereo surround outputs instead.
The loudspeaker configuration (two-channel or multi-channel)
appears in the loudspeaker display on the DVD receiver.
1 To switch between two-channel and multi-channel mode, press
»
K« on the remote control repeatedly.
– Display during switching: briefly »PLII OFF«, »PLII
MUSIC« or »PLII MOVIE«.
– Display on the DVD receiver in Dolby Pro Logic mode:
»ijProLogic II«.
GENERAL FUNCTIONS
________________________
PLII MOVIE
ijProLogic II
THEATRE