Filter
Top Products
ENGLISH
27
Switching on and off
1 When the DVD is switched off, press »ON/OFF« to switch it to
standby mode.
– The standby indicator on the DVD receiver lights up red.
2 Press »9« on the remote control to switch on the home cinema
system from standby mode.
– The standby indicator on the DVD receiver goes out.
– DVD receiver display: briefly »WELCOME«.
– The system switches on with the most recently selected input
source.
3 Press »9« on the remote control to switch the home cinema
system to standby mode.
– Display: briefly »GOOD-BYE«, the display on the DVD
receiver goes out.
– The standby indicator on the DVD receiver lights up red.
4 Press »ON/OFF« on the DVD receiver to switch it off.
– The standby indicator on the DVD receiver goes out.
Note:
You can switch on the home cinema system from standby mode
to the appropriate input source using the »DVD«, »AM FM«
or »AUX« buttons on the remote control.
Selecting the input source
1 Select the input source (DVD, TUNER FM/AM, AUX) by press-
ing »FUNCTION« on the DVD receiver or »DVD«, »AM
FM« or »AUX« on the remote control.
– Display on the DVD receiver: »DVD«, »TUNER FM«, »TUNER
AM«, »VIDEO 1«, »VIDEO 2«, »SCART IN« or »DIGITAL
IN«.
Preparing for disc playback
1 Switch on the television and select the preset channel for the
DVD receiver.
2 Switch on the DVD receiver from standby by pressing »9« on
the remote control or »ON/OFF« on the device.
3 Select the DISC input source.
– Display on the DVD receiver: briefly »DVD«, followed by
»LOADING« and then »NO DISC«.
GENERAL FUNCTIONS
________________________
WELCOME
GOOD-BYE
DVD
NO DISC