Filter
Top Products
19
Connecting up the
DSP loudspeakers
To connect to a Meridian product with BNC Comms
BNC COMMS
Front R – Slave
G Series CD Player or Control Unit
Front L – Master
SpeakerLink lead
Digital/BNC lead
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT
DIGITAL OUTPUT
If the Meridian source or control unit provides a
Meridian BNC Comms output, you will need to connect
it to the DSP Loudspeakers using a Digital/BNC lead.
Connect the DIGITAL OUTPUT and the BNC
COMMS socket from the Meridian source or control
unit to the DIGITAL INPUT and COMMS INPUT on
the DSP loudspeaker chosen as the master, using a
Digital/BNC lead.
Connect the SpeakerLink output from the master
DSP loudspeaker to the SpeakerLink input on the
other (slave) DSP loudspeaker, using a SpeakerLink
lead.
•
•
Configure the master DSP loudspeaker as M.Coax
and the slave DSP loudspeaker as S.RJ45; see
To
choose master or slave and the primary connector
,
page 28.
•