Filter
Top Products
14
DSP7200 and
DSP7200HC
Specifications
Connections
Meridian SpeakerLink (RJ45) input and output,
providing balanced digital audio, Meridian Comms,
and serial interface.
Digital co-axial input and output.
Meridian BNC Comms input and output.
Digital formats
44.1–96kHz. FIFO locks at 44.1, 48, 88.2, or
96kHz ±150ppm.
PCM using IEC958, or MHR connection support with
auto-detection.
Signal processing
1 x Motorola 56367 running at 150MHz.
4 x 24-bit Multi-bit delta-sigma DACs with 128x
oversampling.
Crossover linear-phase ±30º at 2.6kHz.
Output stages
Power amplifiers: Complementary bipolar design, with
output-stage error correction and twin loop design.
Bass: 2 x 150W.
Mid: 150W.
Treble: 150W.
Total: 600W.
Acoustic
3 way.
Ported bass enclosure.
Isolated mid enclosure.
Bass drive unit: 2 x 200mm (8") high-efficiency long-
throw custom drivers.
Mid drive unit: 1 x 160mm (6") custom polypropylene
driver using phase plug.
Treble drive unit: 1 x 25mm (1") Meridian piston in
short horn, aluminium dome with silver voice-coil.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Characteristics
Distortion typically <0.01%, or <0.02% up to full
power at all frequencies.
Noise and hum <-94dBr at all volume settings.
Acoustic output typically >112dB spl @ 1m on music
material.
Acoustic noise <15dB spl @ 1m.
Frequency response in room response within 3dB,
28Hz–20kHz.
Cabinet
Entire speaker manufactured from interlaminated
panels.
Finished in high-gloss piano lacquer.
8-character display with system lights.
DSP7200: 350mm x 1072mm x 415mm (13.8" x
42.2" x 16.3") (W x H x D).
DSP7200HC: 1060mm x 295mm x 478mm (41.7"
x 11.6" x 18.8")
(W x H x D).
DP7200: 55kg (121lb) each.
DP7200HC: 64kg (141lb).
Power
100-125; 200-250V AC 50-60Hz.
20VA standby; 920VA max.
Meridian Audio reserves the right to amend product
specifications at any time.
•
•
•
•
•
•
•
•
•
•
•
•
•
•