Filter
Top Products
24
Using the DSP
loudspeakers
Adjusting the volume
The DSP loudspeakers adjust the volume in precise
steps of 1dB, where 9dB is equivalent to doubling the
loudness, and can be varied in the range 1 to 99dB.
When you first connect power to the DSP loudspeakers
the volume is set to 65, which is similar to the midway
position of the rotary volume control on a conventional
preamplifier.
To change the volume
Press the A or V volume keys on the remote.
As you adjust the volume setting the display will show
the current volume level.
For example:
Radio55
To mute (silence) the sound
Press Mute on the remote.
The display will show:
Muted
To restore the sound
Press Mute again on the remote.
Alternatively the sound will be restored if you adjust the
volume.
•
•
•