Filter
Top Products
10
DSP5200 and
DSP5200HC
Specifications
Connections
Meridian SpeakerLink (RJ45) input and output,
providing balanced digital audio, Meridian Comms,
and serial interface.
Digital co-axial input and output.
Meridian BNC Comms input and output.
Digital formats
44.1–96kHz. FIFO locks at 44.1, 48, 88.2, or
96kHz ±150ppm.
PCM using IEC958, or MHR connection support with
auto-detection.
Signal processing
1 x Motorola 56367 running at 150MHz.
4 x 24-bit Multi-bit delta-sigma DACs with 128x
oversampling.
Crossover linear-phase ±30º at 2.6kHz.
Output stages
Power amplifiers: Complementary bipolar design, with
output-stage error correction and twin loop design.
Bass: 2 x 75W.
Treble: 75W.
Acoustic
2 way.
Ported bass enclosure.
Isolated mid enclosure.
Bass drive unit: 2 x 160mm (6") custom
polypropylene driver using phase plug.
Treble drive unit: 1 x 25mm (1") Meridian piston in
short horn, aluminium dome with silver voice-coil.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Characteristics
Distortion typically <0.02% up to full power at all
frequencies.
Noise and hum <-94dBr at all volume settings.
Acoustic output typically >108dB spl @ 1m.
Acoustic noise <15dB spl @ 1m.
Frequency response in room response within 3dB,
35Hz-20kHz.
Cabinet
Entire speaker manufactured from interlaminated
panels.
Individually covered grilles for bass units.
Finished in graphite, black, or silver high-gloss
lacquer.
8-character display with system lights.
DSP5200: 300mm x 903mm x 356mm (11.8" x
35.6" x 14.0") (W x H x D).
DSP5200HC: 735mm x 201mm x 267mm (29.0" x
7.9" x 10.5") (W x H x D).
35kg (77lb) each.
Power
100-125; 200-250V AC 50-60Hz.
20VA standby; 600VA max.
Meridian Audio reserves the right to amend product
specifications at any time.
•
•
•
•
•
•
•
•
•
•
•
•
•
•