Filter
Top Products
TP Receivers • Installation and Operation
2-9
TP R 15HD A only — For optional rack mounting, mount the
receiver on a VersaTools 3.5" deep 1U Rack Shelf (Extron part
#60-190-20) (gure 2-4). The TP R 15HD A mounts in one of four
locations on the rack.
(2) 4-40 x 3/16" screws
Use 2 Mounting Holes on
Opposite Corners
VersaTools Rack Shelf
1/4 Rack Width False Front
Face Plate
TP R 15HD A
RGB
PEAKING
LEVEL
TP R 15HD A
RGB
PEAKING
LEVEL
TP R 15HD A
RGB
PEAKING
LEVEL
Figure 2-4 — VersaTools rack mounting the TP R 15HD A
1. If feet were previously installed on the bottom of the
receiver, remove them.
2. Mount the receiver on the rack shelf, using two
4-40 x 3/16" screws in opposite (diagonal) corners to
secure the receiver to the shelf.
3. Install blank panel(s) (included in the 1U universal and
VersaTools rack kits, optional for the 1U basic rack kit) or
other unit(s) to the rack shelf.
N
Only the TP R 15HD A and products in the Extron
VersaTools line can be mounted on a VersaTools shelf.
Any 1U rack‑mountable Extron product can be mounted
on the standard shelf.
Furniture mounting
All receiver models can be mounted under furniture such
as a table or podium surface using the appropriate optional
mounting bracket; the Extron Under-Desk Mounting Kit for 1/8
and 1/4 Rack Width Products (part #70-212-01) (TP R 15 HD A)
or Under-Desk Mounting Kit for 1/2 Rack Width Products (part
#70-077-01) (all other models).