Filter
Top Products
RGB 201 Rxi Universal Interface • Installation and Operation
Installation and Operation, cont’d
2-10
(2) 4-40 x 3/16" Screws
Use 2 mounting holes on
opposite corners
False Front panel
uses 2 front holes
RGB 201Rxi
B
O
O
S
T
L
E
V
E
L
C
O
N
TR
O
L
P
E
A
K
W
IT
H
A
D
S
P
TM
C
E
N
T
E
R
IN
G
Figure 2-5 — Rack mounting
3. Secure the interface to the rack shelf with the two provided
4-40 x 1/8" machine screws. Insert the screws from the
underside of the shelf, and securely fasten them through
diagonally opposite corners as shown in the illustration
above.
4. Fasten the false front panel (provided with the rack shelf)
to the unoccupied side of the rack (as shown above), or
install a second half-rack-width device in that side by
repeating steps 1 through 3.
5. Secure the rack shelf to the rack using four 10-32 x 3/4"
bolts. Insert the bolts through #10 beveled washers, then
through the holes in the rack ears.