Filter
Top Products
RGB 201 Rxi Universal Interface • Installation and Operation
2-7
4. Insert the four wood screws into the pilot holes. Fasten
each screw into the installation surface until just less than
1/4" of the screw protrudes.
5. Align the installed screws with the slots in the mounting
brackets, and place the interface against the surface, with
the screws through the bracket slots.
6. Slide the interface slightly forward or back, then tighten all
four screws to fasten it in place.
Through-desk mounting
1. If rubber feet were installed on the interface, remove them.
RGB 201Rxi
B
O
O
S
T
L
E
V
E
L
C
O
N
T
R
O
L
P
E
A
K
W
IT
H
A
D
S
P
TM
C
E
N
T
E
R
IN
G
Figure 2-4 — Through-desk mounting