Filter
Top Products
3-21
DVS 304 • Serial Communication
Command ASCII (Telnet
(host to processor
URL Encoded (Web
(host to processor
Response
(processor to host
Additional description
IP setup commands, continued
Set Verbose mode
24
E X2@CV} W X2@CV
|
VrbX2@]
Set verbose mode.
N The processor can send out unsolicited information (such as notice of a volume or input change or a change in some other setting). That is called verbose (wordy) relationship
between the processor and a connected device. For a direct RS-232/422 connection, the processor is set for Verbose mode by default. When the DVS 304 is connected via
Ethernet, Verbose mode is disabled by default in order to reduce the amount of communication traffic on the network. If you want to use the Verbose mode with a processor
connected via Ethernet, this mode must be set to On each time you reconnect to the processor..
Read verbose mode
ECV} WCV
|
X2@]
Read connection’s security
level
ECK} WCK
|
X5@]
Re-map port designations
Set Telnet port map
24
E{port #}MT}
W{port #}MT
|
Pmt{port #}
]
Reset Telnet port map
24
E23MT}
W23MT
|
Pmt00023
]
Disable Telnet port map
24
E0MT}
W0MT
|
Pmt00000
]
Read Telnet port map
EMT}
WMT
|
{port #}
]
Set Web port map
24
E{port #}MH}
W{port #}MH
|
Pmh{port #}
]
Reset Web port map
24
E80MH}
W80MH
|
Pmh00080
]
Disable Web port map
24
E0MH}
W0MH
|
Pmh00000
]
Read Web port map
24
EMH}
WMH
|
{port #}
]
Set Direct Access port map
24
E{port #}MD}
W{port #}MD
|
Pmd{port #}
]
Reset Direct Access port map
24
E2001MD}
W2001MD
|
Pmt02001
]
Disable Direct Access port map
24
E0MD}
W0MD
|
Pmd00000
]
Read Direct Access port map
24
EMD}
WMD
|
{port #}
]
N
X2@ = Verbose/Response Mode (Default = 0 for Telnet connections; 1 for RS-232 host control).
0 = clear/none, 1 = verbose mode, 2 = tagged responses for queries, 3 = verbose mode and tagged responses for queries
If tagged responses is enabled, all read commands will return the constant string + the data, like setting the value does (e.g. command: Esc CN } response: Ipn• x12]).
X5@ = Connection’s security level: 0 = anonymous, 1 – 10=extended security levels 1 thru 10, 11 = user, 12 = administrator