Epson 5020UB Home Theater System User Manual


 
Making Detailed Adjustments 53
Resetting the Projector
If the image quality isn’t what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Settings menu), open that
menu, select
Reset, and confirm as needed. The example below shows how to reset the
Image menu settings:
You can also reset the lamp usage timer or restore all the projector settings to their original
values. Follow these steps:
1. Press the
Menu button on the remote control.
2. Open the
Reset menu.
3. Do one of the following:
Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero.
You should reset the lamp timer only when you install a new projector lamp. See
page 75 for more information.
Select Reset Memory to clear all memory settings.
Select Reset All to return all projector settings to their original defaults (except Input
Signal, User Button, Language, and Lamp Hours).
Open the Image
menu . . .
and select Reset