Filter
Top Products
44 Making Detailed Adjustments
■ Motion Detection
This setting specifies how signals are converted to progressive signals. Select a lower
setting for slow-moving or still images (
S) or select a higher number for video images
(
M).
Note: This setting can be used only when viewing a composite video signal, or 480i or 576i, or
1080i signals input through the Component, HDMI1, or HDMI2 ports (see page 89).
■ Noise Reduction
Note: This is not be available with a signal input through the PC port.
This setting reduces flickering of analog images. You can select from 3 levels of noise
reduction.
■ Frame Interpolation
This setting compares the current and previous frames, then creates a frame between
them to reduce fuzziness and produce clearer moving images. You can select from 3 levels
of frame interpolation. You can also access this setting by pressing the
Frame Int button
on the remote control.
■ Super-resolution
Note: This feature is not available when projecting in 3D.
This setting sharpens blurred images, enhancing the apparent detail of the image. You can
select from 3 levels of enhancement. Note that intentionally blurred parts of the image,
such as out-of-focus backgrounds, may become sharper.
Signal > Motion Detection
Signal > Advanced > Noise Reduction
Signal > Frame Interpolation
Signal > Super-resolution