Filter
Top Products
ENGLISH
OPERATION
PROCEDURE
84
Set [USB Mode] to [Mass Storage] on the OSD.
When this product is USB-connected to the PC, image data in the SD card can be transferred
into the PC. The Operating System (OS) of the connected PC should be Microsoft Windows
2000(SP4 or newer)/XP(SP2 or newer).
(1) Turn ON the power supply to this product and to the PC.
(2) Connect this product to the PC with the attached USB cable.
When this product is connected to the PC for the first time, the required drivers are installed automatically
due to the plug-and-play function of Windows. For the second time and thereafter, the drivers are no
longer installed.
(3) This product is recognized as a removable disk. The image data in an SD card can be
viewed by using the viewer software of the PC.
• The image data are stored in JPEG format in the following folders:
My Computer
Removable disk
DCIM
100_ELMO
IMAG0001.JPG
IMAG0002.JPG
:
An SD card set in this product cannot be formatted or written, deleted, locked, and unlocked with image
data from the PC.
The image data cannot be recorded with the correct date and time.
When the front operating panel or wireless remote control is in operation, do not connect/ disconnect
the USB cable, or malfunction will be caused to this product.
Do not switch [USB Mode] on the OSD when this product is in USB-connection.
The USB cable compliant with USB2.0 is recommended.
Transferring the images from the SD card
into the USB-connected PC