Filter
Top Products
ENGLISH
30
°
30
°
30
°
30
°
30
°
30
°
°
PART NAMES
AND
FUNCTIONS
73
■ Receivable Range
Point the infrared emitting part of the wireless remote control at the infrared sensor of the main unit, and
press the button for desired function.
The receiving range may be reduced when the main unit is placed in direct sunlight, near an inverter
fluorescent lamp or in any other unfavorable surrounding.
Depending on the conditions of fluorescent lamps, etc., the sensor may fail to receive the infrared light. In
such case, relocate the main unit, or take other countermeasures.
• Receivable range
Distance: Approx. 7m (23ft) or less from the front of the infrared sensor
Angle: Approx. 30° or less to the right, leftward, upward and downward,
respectively, from the infrared sensor
■ Battery Change
Remove the battery case cover on the rear side by pressing down the [ OPEN] mark part in
the direction as indicated by the arrow.
Install 2 pcs of batteries (Type R03, AAA) in the battery case in the direction as indicated
there.
Install the batteries with the correct polarity.
Although the battery life depends on the operating conditions and battery type, changing batteries once
a year is recommended.
The supplied batteries are only for use in initially confirming the operation of this product. Therefore, it is
not guaranteed that these batteries remain alive for the validated period.
Within 7m (23ft)