Filter
Top Products
25
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the mode changes
as follows:
Tuning mode : “PRESET” goes off.
Preset mode : “PRESET” lights up.
• You can store up to 30 preferred stations in the
memory.
• Then “ AUTO” appears on the display. The tuner
will now search until a station of sufficient strength
has been found. The display shows the tuned
frequency and “TUNED”.
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• “MEMO” is flickering for 5 seconds.
Presetting radio stations
• Manual tuning is useful when you already know the frequency of the desired
transmitter.
• Perform the steps ~ in “Auto tuning” procedure and press the
TUNING/PRESET UP() or DOWN()button repeatedly until the right
frequency has been reached.
Manual tuning
• Each time this button is pressed, the band changes as
follows :
FM Stereo mode FM Mono mode AM
(“STEREO” lights up ) (“ STEREO” goes off)
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to
reduce the noise, then FM broadcasts are reproduced
in monaural sound.
• When pressing the BAND button without selecting
the TUNER, the tuner will be selected automatically.
Select the tuner.
1
Select the tuning mode.
3
Tune in the desired station with auto or
manual tuning.
1
Press the MEMORY/ENTER button.
2
Select the desired band.
2
Press the TUNING/PRESET UP() or
DOWN() button for more than 0.5 second.
4
DVD
VOL.
CH LEVEL
CH SEL
DSP
MODE
AUTO
ST
CENTER
MODE
TEST
TONE
DISC
P.SCAN
TUNER
CD
T1/MONAUX
PHONO
VID1 VID2 VID3 VID4 VID5
SYS DISPSLEEP
DIRECT IN
ROOM2
INTRO
RETURN
B
RPT
A
7.1 SURR
TITLE
ENTER
or
AUDIO
TUNER
HOME THEATER MASTER
RV4700 DTS-ES
BAND
BAND FREQUENCY
T/P MODE
TUNING/PRESET
TUNING/PRESET
MEMO/ENTER