Filter
Top Products
PROGRAMMING YOUR REMOTE CONTROL
PAGE 8-5
component at some future time, you can restore the remote control’s capability to control the auxiliary
component’s volume by simply repeating these two steps.
Assigning a Device to a Different Device Key
You can assign a component to a mode key that has a different label. For example, you can assign a
second TV to the AUX key.
1. Begin the programming process as described earlier. (i.e. Press and hold the “AUX” key and then
press the “Mute” key. Then release both keys.)
2. Press the device key associated with the type of device you wish to assign to the AUX key.
3. Establish the correct code, either by scanning or direct code entry.
4. Press the “AUX” key to store the code onto the “AUX” key