Filter
Top Products
Using the timer function Using the timer function
18
ENGLISH
ENGLISH
Setting the sleep timer
Example: Setting so that the power turns off in 80 minutes.
Press [SLEEP] during playback.
•The “SLEEP” indicator flashes.
Press [SLEEP] repeatedly while the “SLEEP” indicator
is flashing to select “80”.
•The “SLEEP” indicator stops flashing, remaining lit, after about
5 seconds.
The power is set to the standby mode after 80 minutes.
1
2
¢Canceling the sleep timer:
Press [SLEEP] repeatedly to select “OFF”.
•The remaining time is displayed when [SLEEP] is pressed while the
sleep timer is operating.
•If [SLEEP] is pressed while the remaining time is displayed, “OFF” is
selected. Reset the timer as desired.
¢If you do not want the timer to operate:
Use 8 or 9 to turn off the timer standby indicator “ ”.
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
9
8
[SLEEP]
[MENU/SET]
8 9
After setting the timer at “Setting the everyday or once timer” (
page 17), select the timer(s) you want to operate.
Press [MENU/SET] twice.
•The current settings are displayed.
Use 8 or 9 to select the timer(s) you want to
operate.
1
2
1 _ on / E _ on :
1 _ off / E _ on :
1 _ on / E _ off :
1 _ off / E _ off :
Neither the once nor the everyday timer
operates.
Both the once and the everyday timers
operate.
Only the everyday timer operates.
Only the once timer operates.
Operation of the everyday and once timers
If only the everyday timer is set, the display switches as follows
when 8 or 9 is pressed.
If only the once timer is set, the display switches as follows
when 8 or 9 is pressed.
1 _ off / E _ on 1 _ off / E _ off
1 _ off / E _ off 1 _ on / E _ off