Filter
Top Products
Using the timer function Using the timer function
17
ENGLISH
ENGLISH
¢If you make a mistake while setting the timer:
q Press BAND at any step from 3 ~ 6.
w Use [MENU/SET] to select the item you want to correct, them make
the correct setting.
e Use [MENU/SET] to proceed to step 7.
¢To check the timer settings:
q Perform steps 1 and 2 on page 17.
w Press [MENU/SET] repeatedly.
¢To change the timer settings:
Perform steps 1 ~ 8 at the left to change the settings as desired.
The timer settings change to the new settings.
To change a setting while still in the timer setting mode, press
BAND then perform steps 3 ~ 8 at on page 17 and above.
¢To delete the timer settings:
q Perform steps 1 and 2 on page 17.
w Press and hold BAND while “EVERYDAY” or “ONCE” is displayed.
¢To stop the timer setting:
Select “1_off/E_off” at step 2 under “Operation of the everyday
and once timers” ( page 18).
Press [MENU/SET] once.
•“TIMER” flashes.
1
2
3
Example 2: Listening to a CD using the once timer
•Load the CD you want to play beforehand.
Use 8 or 9 to select “ONCE”, then press
[MENU/SET].
Use 8 or 9 to select “CD”, then press
[MENU/SET].
Setting the everyday or once timer
Be sure to set the current time first ( page 16).
Example 1: Listening to preset number “3” with the everyday timer
•To use the timer function to listen to AM or FM broadcasts, be sure
to preset the desired station first ( page 13).
Press [MENU/SET] once.
•“TIMER” flashes.
Use 8 or 9 to select “EVERYDAY”, then press
[MENU/SET].
1
2
Perform steps 3 to 5 under “Setting the current
time” ( page 16) to set the timer start time.
5
Perform steps 3 to 5 under “Setting the current
time” ( page 16) to set the timer stop time.
6
Use 8 or 9 to select “TUNER”, then press
[MENU/SET].
3
Use 8 or 9 to select preset number “3”, then
press [MENU/SET].
•The presettings are stored in the memory.
4
Use 8 or 9 to select “1_off / E_on”, then press
[MENU/SET].
•The timer standby indicator “ ” lights. The time is now set.
For details, see “Operation of the everyday and once timers”
( page 18).
7
Press ON/STANDBY.
•The power is set to the standby mode and the power indicator
lights orange.
When the timer start time is reached, the timer operates.
8
Perform steps 3 to 5 under “Setting the current
time” ( page 16) to set the timer start time.
4
Perform steps 3 to 5 under “Setting the current
time” ( page 16) to set the timer stop time.
5
Use 8 or 9 to select “1_off / E_on”, then press
[MENU/SET].
•The timer standby indicator “ ” lights. The time is now set.
For details, see “Operation of the everyday and once timers”
( page 18).
6
Press ON/STANDBY.
•The power is set to the standby mode and the power indicator
lights orange.
When the timer start time is reached, playback starts from the
first track on the CD.
7