Filter
Top Products
12
ENGLISH
ENGLISH
Turning the power on
[TUNER]
[
D
,
H
,
G
,
F
]
9
[MENU/SET]
[
7
]
BAND
SEARCH
[ENTER/MEMO]
[
6
]
8
ON/STANDBY
[VOLUME]
[OPEN/CLOSE]
[SDB/TONE]
8 9
<VOLUME><FUNCTION>
TUNINGBAND
<5>
ON/STANDBY
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Basic Operation
Press ON/STANDBY.
When the power is turned on, the function that was being used
when the power was last turned off is selected (selector
function).
¢Turning the power off (to the standby mode):
Press ON/STANDBY again.
Loading discs
Press
<
5
>
or [OPEN/CLOSE] to open the disc tray.
( page 3)
¢To close the disc tray:
Press
<
5
>
or [OPEN/CLOSE] again.
NOTE:
•Be sure to turn on the power when opening and closing the disc
tray.
•Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
•Do not insert foreign objects into the disc tray. Doing so will
damage it.
•Information on the power indicator
•Power on ..................................Blue
•Standby mode...........................Red
•Low-power standby mode........Off ( ) ( page 19)
•Timer standby mode.................Orange
When in the low-power standby mode, a very small amount of
power is consumed, even if all the indicators are turned off.
Adjusting the volume
Turn
<
VOLUME
>
or press [VOLUME].
Adjusting the tone
To emphasize the low bass sound:
When “SDB ON/OFF” is displayed, use
88
or
99
to select “ON” or “OFF”.
Use [SDB/TONE] to select the tone parameter to be
adjusted.
1
TREBLEBASSSDB
S. DIRECT BALANCE
SDB: Adjusts the low bass sound.
BASS: Adjusts the bass sound.
TREBLE: Adjusts the treble sound.
BALANCE: Adjusts the left/right volume balance.
S. DIRECT: The sound is played with the tone flat.
2
-1
To adjust the bass or treble sound:
When “BASS” or “TREBLE” level is displayed, use
88
or
99
to adjust.
2
-2
To adjust the left/right volume balance:
When “BALANCE” is displayed, use
88
or
99
to
adjust.
2
-3
•The tone is only flat when “S.DIRECT” is selected. To adjust the
tone controls set a made other than “S.DIRECT”.
[CLEAR]