Filter
Top Products
16
ENGLISH
ENGLISH
Using the timer function
Press and hold [MENU/SET].
•“TIME Adj” is displayed.
•The hour’s display flashes.
Use 8 or 9 to set the hours to “19”.
•“19” flashes.
Setting the current time
Press [CLOCK].
2
Press [MENU/SET] simultaneously with the tone of a
time casting, etc.
•“TIME Adj” turns off.
•The current time is displayed.
6
3
1
The S-81’s clock displays the time in the 24-hour mode.
Example: To set the current time to “19:30”
Before setting the timer
Press [MENU/SET].
•The minute’s display flashes.
4
Use 8 or 9 to set the minutes to “30”.
•“30” flashes.
5
•If [MENU/SET] is pressed before the time is set, the time setting
mode is set.
•If the current time has been set, it can be displayed by pressing
[CLOCK].
•In the standby mode, the current time can also be displayed by
pressing [MENU/SET].
NOTE:
• The time cannot be set when in the standby mode. Turn on the
power first.
¢Types of timers
The S-81 has three timer functions.
q Everyday timer:
Use this to play at the set time every day.
w Once timer:
Use this to play once only at the set time.
e Sleep timer:
Use this to turn off the power after up to 90 minutes, set in
intervals of 10 minutes.
¢Order of priority for the timers
• If the times set for the three timers overlap, the sleep timer has
priority.
• If the times set for the everyday and once timers overlap, the once
timer has priority.
¢If there is a power cut
• The current time setting is canceled. Turn the power on and reset
the current time.
• The timer settings are cleared. Set the timer again.
• The tuner’s presettings may be cleared. If so, perform the
presetting procedure again.
NOTE:
•If the current time is not set, the timer standby indicator “ ”
will not light.
•When the timer is set, the timer standby indicator “ ” lights.
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
[MENU/SET]
[CLOCK]
[ON/STANDBY]
9
BAND
8
8 9
<ON/STANDBY>
BAND