Filter
Top Products
ENGLISH
19
1, 3
4
Example: Playing a disc containing 15 tracks and with a playing time of 62 minutes, 3
seconds, starting from the first track.
Normal Playback
11
PLAYING CDs
2
Load the CD in the disc tray.
1
Press the 5 (open/close) button to open the
disc tray.
3
Press the 5 (open/close) button. The disc
tray closes.
• After several seconds, the disc
information is displayed.
4
Press the 1/ 3 (play/pause)
button.
Main unit
Main unit
Main unit Remote control unit
4
1/ 3 (play/pause) button
2 (stop) button
NOTES:
• When a disc is loaded, “LOADING” is displayed on the display for several seconds while the
data on the number of tracks and total playing time is being read from the innermost side of
the disc, after which the number of tracks and total playing time appear.
• The CD SRS button of the cassette deck will not function if pressed while the disc is being
read. Please press this button after the total playing time
has been displayed.
• If no disc is loaded, if the disc is upside down, or if the data
cannot be read properly due to scratches or dirt, the display
reads as shown below and the disc will not play.
Interrupting playback temporarily
Resuming playback
Stopping playback
1
Press the 1/ 3 (play/pause)
button.
The “ 3 ” mark appears on the
display, and playback stops at
the point where the button was
pressed.
1
Press the 1/ 3 (play/pause)
button.
The “ 3 ” mark turns off on the
display, and playback resumes
from the point where the pause
button was pressed.
1
Press the 2 (stop) button.
Main unit Remote control unit
Main unit Remote control unit
Main unit Remote control unit
2 (stop) button
1/ 3
(play/pause)
button