Filter
Top Products
ENGLISH
16
2, 4, 6, 8, 10, 12, 14, 16, 18
1, 19
3, 5, 7, 9, 11, 13, 15, 17
Example: Setting the tuner to turn on at 1:35 p.m., off at 1:56 (with FM 92.50 MHz preset at
channel 3) with everyday timer.
1
Press the power operation
switch to turn on the power.
2
Press the MENU/ SET button to
set the timer setting mode.
3
Press either the 9 or
8 button as desired.
•
The everyday timer is selected and “EVERYDAY”
appears in the display.
4
Press the MENU/ SET button.
Setting the Timer
5
Use the 9 or 8
button to set the
“TUNER” mode.
Say that FM 87.5 MHz is tuned
in preset channel number “ 1 ”.
Flashes
The power can be set to turn on and off at a specific time or at the same time everyday.
Flashes
NOTE:
• Please do not change the setup function of this unit after performing the timer setup. In the
event the setup function is changed, the timer start mode may not start properly.
Main unit Remote control unit
Remote control unit
Main unit
Main unit Remote control unit
Remote control unitMain unit
Main unit Remote control unit
Flashes
2, 4, 6,
8, 10, 12,
14, 16, 18
1
3, 5, 7,
9, 11, 13,
15, 17
19
6
Press the MENU/ SET button.
7
Use the 9/ 8 button to set the preset channel
number.
Flashes
(If the timer has already been
set, that number flashes.)
Flashes
8
Press the MENU/ SET button.
9
Use the 9 or 8
button to set the hours
for the timer on time.
Flashes
Remote control unitMain unit
Main unit Remote control unit
Remote control unitMain unit
Main unit Remote control unit
10
Press the MENU/ SET button.
11
Use the 9 or 8
button to set the
minutes for the timer on
time.
12
Press the MENU/ SET button.
13
Use the 9 or 8
button to set the hours
for the timer off time.
14
Press the MENU/ SET button.
Flashes
(If the timer has already been
set, that number flashes.)
Remote control unitMain unit
Main unit Remote control unit
Flashes
Remote control unitMain unit
Flashes
(If the timer has already been
set, that number flashes.)
Main unit Remote control unit
Flashes
Flashes
(If the timer has already been
set, that number flashes.)
Remote control unitMain unit